Refrigeration Industrial Dehumidifier with Air Conditioning 5-35Celsius Degree
Main Parameters(Test condition: T=27℃,RH=70%)
|Nominal Dehumidifying Capacity||15kg/h||20kg/h|
|Rated Input Current||19A||26.3A|
|Rated Input Power||7.2KW||10KW|
|Drainage Mode||external soft tube connection, drain continuously|
Indoor Unit: 1480*900*2030(mm)
Outdoor Unit: 1600*970*1030(mm)
|Automatic Defrost||Start when environment temperature below 18℃|
|Wind Direction||Front input top output|
|Design||touch screen, humidity and time automatic control|
Fuda dehumidifiers are effective solutions to environmental control problems. The ranges of units are high capacity dehumidifiers, made to operate at high efficiencies by removing moisture from the air through the refrigeration process. Than fan draws the moist air through the cold evaporator coil, which cools the air below its dew point. Moisture forms on the evaporator coil and is collected in condensate tray before draining away through the condensate tube. The cooled air then passes through the hot condenser coil where it is reheated using the same energy removed during the cooling phase, plus the additional heat generated by compressor. The air is, therefore, discharged from the dehumidifiers at a slightly higher temperature with a lower absolute humidity than that which entered. Continuous circulation of air through the dehumidifier gradually reduces the relative humidity within the area.
Industrial temperature conditioning dehumidifier is widely used in the area which need both humidity and temperature controlling. Theoretically, the machine can control the room RH from 45%~60%, and temperature from 5℃~35℃. Don't need to install additional air conditioner equipment. All settled by one machine.
User Friendly Control System
Contact us now, we will provide thorough solutions for your air temperature and humidity.