Customized Desiccant Rotor Dehumidifier RH≤20% for Softgel Capsule Drying Room 18000m3/h
Dehumidify Mode: Cooling and Rotor 2 in 1
Desiccant Rotor: Sweden Proflute
Desiccant Material: Silica Gel Wheel
Rated Air Flow: 18000m³ /h
Supply Air Parameters: T=20℃ RH=20%
Dehumidifier capacity: 96kg/h
Installed Power: 21.7kw
Voltage: 380V, 3 phase, 50Hz or customer
Reactivation Mode: Steam, energy-saving
Usage: Air temperature and humidity control
ZCB Series Combined Industrial Desiccant Rotor Dehumidifiers remove humidity using both refrigeration and a desiccant rotor, so it can both control the humidity and temperature of the air independently in one packaged unit.
Supply Air Stream
Outside air is drawn into the unit using the supply fan. The warm, moist outside air first passes through filters and then the cooling coil where it is cooled. The air then goes through the desiccant wheel where the air is dehumidified and the temperature is raised. At last the air is delivered directly to the space or into an existing air handler.
Exhaust Air Stream
Exhaust air is used to provide energy recovery for the desiccant wheel and is drawn into the unit using the exhaust fan. The air filtered and then heated and humidified during the energy recovery process. The air is then heated while passing through the regeneration coil. The heated air removes the moisture that the desiccant wheel adsorbs from the process air stream.
Pharmaceutical factories, especially for softgel capsule drying room
|Total Process Airflow (m3/h)||18000|
|Required Room Condition||T=18-24℃,RH≤20%|
|Fresh Airflow (m3/h)||1500|
|First Recirculated Airflow (m3/h)||10500|
|Rotor Process Airflow (m3/h)||12000|
|Rotor Reactivation Airflow (m3/h)||4000|
|Second Recirculated Airflow (m3/h)||6000|
|Supply Air Parameters||T=20℃,RH≤20%|
|Reactivation Steam Consumption (kg/h)||180|
|Reactivation Fan Power (kw)||3.0|
|Blower Power (kw)||18.5|
|Driving Motor Power (kw)||0.2|
|Cooling Load (kw)||176.1|
|Chilled Water Consumption(T/h)||30.3|
|Installed Power (kw)||21.7|
We can provide the technical design and suitable dehumidifier according to your requirements.