Small Fully Automatic Industrial Dehumidifying Equipment
Fuda dehumidifiers are effective solutions to environmental control problems. The ranges of units are high capacity dehumidifiers, made to operate at high efficiencies by removing moisture from the air through the refrigeration process. Than fan draws the moist air through the cold evaporator coil, which cools the air below its dew point. Moisture forms on the evaporator coil and is collected in condensate tray before draining away through the condensate tube. The cooled air then passes through the hot condenser coil where it is reheated using the same energy removed during the cooling phase, plus the additional heat generated by compressor. The air is, therefore, discharged from the dehumidifiers at a slightly higher temperature with a lower absolute humidity than that which entered. Continuous circulation of air through the dehumidifier gradually reduces the relative humidity within the area.
Fuda dehumidifiers clear the air in damp interior spaces. Condensation is removed from windows, walls and ceilings. Stuffy air is drawn off and dry air is pumped back in. You simply set the dial and air humidity remains at the desired level. The dehumidifiers are energy savers.
10. Optional inlet/ outlet duct flanges
Main Parameters(Test condition: T=27℃,RH=70%)
|Nominal Dehumidifying Capacity||20(L/Day)||26(L/Day)|
|Rated Input Current||2.5A||3.0A|
|Rated Input Power||500W||550W|
|Drainage Mode||Water pan connected, water full automatic stop with indicator, also can Continuous drainage|
|Compressor||Named compressor, energy-saving and high effeciency|
|Automatic Defrost||Start when environment temperature below 18℃|
|Mobile Mode||Easy to move by caster|
|Wind Direction||Upward or downward, adjustable|
|Design||Computer type, LCD Screen Display, Humidity and time automatically control|